Final Expansion :: 512KB SRAM + 512KB EEPROM + SD Card (2GB)

Vic20-Ian · Post by **Vic20-Ian** » Tue Apr 23, 2013 9:19 am

It is in the post to your email address. Enjoy.

Questarian · Post by **Questarian** » Sat May 11, 2013 8:40 pm

Does anyone have any doc's for the FE3? the
t-winkler.net sites been down... apparently the got hit by a hacker. Any advices? I've found bits and piece, but I'm getting stuck... like on deleting stuff I've flashed to the cart.

lordbubsy · Post by **lordbubsy** » Sun May 12, 2013 2:56 am

I've assembled all available info's I could find and put it in a PDF as one single Manual.
I hope this covers most questions.
http://content.wuala.com/contents/lordb ... 3MANUAL.7z

orion70 · Post by **orion70** » Mon May 13, 2013 6:18 am

Wow, very complete, thank you for this!

Vic20-Ian · Post by **Vic20-Ian** » Mon May 13, 2013 8:25 am

Don't forget this fabulous addition: 512k ram disk mode!

http://sleepingelephant.com/ipw-web/bul ... sk&start=0

Questarian · Post by **Questarian** » Mon May 13, 2013 6:28 pm

lordbubsy wrote:I've assembled all available info's I could find and put it in a PDF as one single Manual.
I hope this covers most questions.
http://content.wuala.com/contents/lordb ... 3MANUAL.7z

Thanks!

highinfidelity · Post by **highinfidelity** » Tue May 21, 2013 2:13 am

Very well done!

I don't know if it's only me but Acrobat Reader replies that there is insufficient data for an image, which I suspect is a missing image on page 1 as I see a huge empty space in there...

orion70 · Post by **orion70** » Tue May 21, 2013 6:14 am

It's a big picture of the cart itself. I don't have any problem with this pdf (foxit reader).

lordbubsy · Post by **lordbubsy** » Tue May 21, 2013 7:27 am

Vic20-Ian wrote:Don't forget this fabulous addition: 512k ram disk mode!

I've included Task Switcher for FE3 and RAM Disk for FE3 as third party software

highinfidelity wrote:I don't know if it's only me but Acrobat Reader replies that there is insufficient data for an image, which I suspect is a missing image on page 1 as I see a huge empty space in there...

I used M$ Word 2007 and Adobobe Acrobat X and I didn't encounter that problem, however I've reimplemented the picture at the front page. I hope that solves it.

http://content.wuala.com/contents/lordb ... ANUAL-I.7z

highinfidelity · Post by **highinfidelity** » Thu May 23, 2013 1:40 am

Thanks, it is displayed perfectly now.

SkydivinGirl · Post by **SkydivinGirl** » Thu May 23, 2013 7:11 am

It appears that the official FE3 web site is still down. I really hope it comes back online soon. I'd be happy to host it myself if the original webmaster does not want to host it anymore.

Thanks!

Heather

lordbubsy · Post by **lordbubsy** » Thu May 23, 2013 8:27 am

At Forum64 on April 19th 2013 member for(;; ) stated the following:
"I contacted Diddl, he wrote that his server was hacked and that he had to delete everything. However, he won't be able to attend to it for a couple of weeks. He also wrote that he was abroad and had only internet occasionally. I'm sure it will be fixed eventually."

http://www.forum64.de/wbb3/board65-neue ... post731079

SkydivinGirl · Post by **SkydivinGirl** » Thu May 23, 2013 8:40 am

That certainly is excellent news.

I'll be sure to make a backup of the site for myself once it's back online.

Thanks!

Heather

srowe · Post by **srowe** » Sat Sep 05, 2015 8:24 am

Did all the documentation get saved and hosted somewhere? I've got the manual that's hosted on koti.kapsi.fi but it doesn't have explanations about the DIP switches on the v10.

SkydivinGirl · Post by **SkydivinGirl** » Sat Sep 05, 2015 8:42 am

The v10 version is a revision of the original v9 that is made by the Sinchai.de shop. The jumper settings are on the page there.

http://www.sinchai.de/index.php?main_pa ... ucts_id=77

Via Google Translate:
1 and 2 for device addresses 8/9/10/11
3 module activation
4 SD2IEC (not) reset

Heather

Denial

Final Expansion :: 512KB SRAM + 512KB EEPROM + SD Card (2GB)

Re: Final Expansion :: 512KB SRAM + 512KB EEPROM + SD Card (2GB)

Re: Final Expansion :: 512KB SRAM + 512KB EEPROM + SD Card (2GB)