penultimate WTF !??
Moderator: Moderators
penultimate WTF !??
Hello
i have ordered a Penultimate directly from thefuturwas8bits.com
i have received the cartridge two days ago, and it do not work at all.... tested on two working Vic, one was arrived from revision the same days !
the two button are only doing a reset, the memory count is still 3.5kb.
so i have send a mail to the seller, two days ago, no answer......
is Thefuturwas8bits is a serious stuff ??
i start to have doubt
Cheers
Laurent
i have ordered a Penultimate directly from thefuturwas8bits.com
i have received the cartridge two days ago, and it do not work at all.... tested on two working Vic, one was arrived from revision the same days !
the two button are only doing a reset, the memory count is still 3.5kb.
so i have send a mail to the seller, two days ago, no answer......
is Thefuturwas8bits is a serious stuff ??
i start to have doubt
Cheers
Laurent
- taborj
- Vic 20 Drifter
- Posts: 31
- Joined: Fri Oct 17, 2014 3:11 pm
- Website: http://obsolete.site
Re: penultimate WTF !??
Did you contact them? Perhaps you just got a dud. It happens, I'm sure.
Re: penultimate WTF !??
yes i have contact them two timer since two days... no reply
Cheers
Laurent
Cheers
Laurent
Re: penultimate WTF !??
Do other cartridges work? Sometimes corrosion or dirt on the cartridge socket can make an unreliable contact.
Re: penultimate WTF !??
hi
yes i have a 16kb vixen cart who work fineon both my vic
the PU havework one time in two hours of connector cleaning
think the PU is deffect
cheers
Laurent
yes i have a 16kb vixen cart who work fineon both my vic
the PU havework one time in two hours of connector cleaning
think the PU is deffect
cheers
Laurent
- cbmeeks
- Vic 20 Enthusiast
- Posts: 190
- Joined: Tue May 18, 2004 12:36 pm
- Website: http://meeks.co
- Location: 8-bit Land
- Occupation: Code Monkey
Re: penultimate WTF !??
Well, remember that these hobby projects are usually run by one person and not some large company. So "customer support" has to take a back seat to things like family duties, work, etc.
I'm not defending the guy, just saying. Two days may not be enough time. I would give him a few more days and make sure you have his email correct or the correct way to contact him.
Now, having said that, I've been reading things like this for a long time. Not just VIC-20 stuff, but lots of places. For example, I bought an SGM at AtariAge and paid a little more than $100 USD. Took almost a YEAR for me to get it. I expected 3-4 months but not a year.
Anyway, I understand your frustration. The makers/sellers do this for the passion. Not the profit. I do wish, however, that the ones selling >$50 devices would be more transparent and responsive at times. It's hard for me to shell out $100 for something and not get any feedback.
I'm not defending the guy, just saying. Two days may not be enough time. I would give him a few more days and make sure you have his email correct or the correct way to contact him.
Now, having said that, I've been reading things like this for a long time. Not just VIC-20 stuff, but lots of places. For example, I bought an SGM at AtariAge and paid a little more than $100 USD. Took almost a YEAR for me to get it. I expected 3-4 months but not a year.
Anyway, I understand your frustration. The makers/sellers do this for the passion. Not the profit. I do wish, however, that the ones selling >$50 devices would be more transparent and responsive at times. It's hard for me to shell out $100 for something and not get any feedback.
Cat; the other white meat.
- amigo-mexicano
- Vic 20 Newbie
- Posts: 10
- Joined: Mon Jan 22, 2018 12:10 pm
- Website: http://www.video-juegos.com
- Location: Mexico City
- Occupation: IT Guy
Re: penultimate WTF !??
Did they answer you yet?
Re: penultimate WTF !??
i have returned the cart, it 'll be tested
but i have already done a lots of test, i have test all continuity between cartridge PCB and expansion port soldering on the motherboard
so, i do not have any connector issue....
to be continue
cheers
Laurent
but i have already done a lots of test, i have test all continuity between cartridge PCB and expansion port soldering on the motherboard
so, i do not have any connector issue....
to be continue
cheers
Laurent
Re: penultimate WTF !??
Hi
I have received my cart, repaired, seem the prom was fryed....
So , i plug it in my vic20, power up and, nothing.... start on a 3.5k config without any menu......
I have tryed it on 6 Vic20 !!!! nothing
Sent a mail to the seller (TFW8bits), and told me
"your Vic20 have fryed the cart again"
How can it be possible ? i use a 32K expansion without any trouble !!!
I have check my PSU voltages, it's ok, the internal voltage, and it's ok again
I do not understand.....
any idea ?
Cheers
Laurent
I have received my cart, repaired, seem the prom was fryed....
So , i plug it in my vic20, power up and, nothing.... start on a 3.5k config without any menu......
I have tryed it on 6 Vic20 !!!! nothing
Sent a mail to the seller (TFW8bits), and told me
"your Vic20 have fryed the cart again"
How can it be possible ? i use a 32K expansion without any trouble !!!
I have check my PSU voltages, it's ok, the internal voltage, and it's ok again
I do not understand.....
any idea ?
Cheers
Laurent
Re: penultimate WTF !??
If EPROMs are X-Rayed during shipment it can cause issues with them. But that is a long shot.
“In religion and politics people’s beliefs and convictions are in almost every case gotten at second-hand, and without examination... whose opinions about them were not worth a brass farthing.”
-Autobiography of Mark Twain
-Autobiography of Mark Twain
Re: penultimate WTF !??
Hi
it's exactly the issue of my PU, the prom was fryed.
i 'll ask if they can ship me another prom
Cheers
Laurent
it's exactly the issue of my PU, the prom was fryed.
i 'll ask if they can ship me another prom
Cheers
Laurent
Re: penultimate WTF !??
i have sent back the PU, i'll be refunded without hope to use a PU a day....
sad.....
Cheers
Laurent
sad.....
Cheers
Laurent