Page 1 of 1

Vic display issue

Posted: Sun Dec 10, 2017 1:01 pm
by Meall
I have a Vic 20 that displays a bunch of random characters on screen at boot up.

Im trying to find the issue, but cant find it. I tested all socketed chips in a working one, and they look fine.

I’ve been suggested to look at this link, which suggests it may be a RAM issue:

http://personalpages.tds.net/~rcarlsen/ ... /vic20.txt

Any suggestions? Where can I get memory chips if that’s the case?

Re: Vic display issue

Posted: Sun Dec 10, 2017 9:54 pm
by cobracon
I would look on ebay for the ram chips.

Re: Vic display issue

Posted: Mon Dec 11, 2017 2:55 am
by lance.ewing
I had a similar issue. There ended up being multiple things wrong. I had a broken track on the data bus that I discovered by doing connectivity tests. But I did also replace all of the 2114 chips, so I can't rule out one or more of the originals being faulty. My BASIC ROM was also faulty.

This is where I got my 2114 chips:

https://www.retroleum.co.uk/results.php?q=2114

They're obviously based in the UK though.