A question:
SJLoad work only on PAL VIC20 or on NTSC too?
About comparing Tokra $98C40-assembled SJLoad version and my $9800 (SYS40000) assembled version:
Tokra's one is a smaller file (less than 1k) and use only I/O3 area (I/O2 free), but it's limited (no SJ-save, no declaring start-stop address....)
My file is regular size and has all features of standard $98 assembled version and when you start it will be writed "SJLOAD V07 SYS40000",
but it need I/O2+I/O3 area
Option that I used:
Code: Select all
SJSAVE = 1 ; 0 = Don't compile SJsave routines (LOAD only)
; 1 = compile SJsave routines
BASIO = 1 ; 0 = Don't compile basic IO routines (LOAD/SAVE only)
; 1 = compile basic IO routines
PRINTADDRESS = 1 ; 0 = Don't print start/end address
; 1 = print start/end address
LOADPARAMS = 1 ; 0 = Don't compile with additional LOAD parameters
; 1 = compile with additional LOAD parameters
SAVEPARAMS = 1 ; 0 = Don't compile with additional SAVE parameters (if SJSAVE == 1 )
; 1 = compile with additional SAVE parameters (if SJSAVE == 1 )
; This option works if PRINTADDRESS = 0 ONLY
PRINTMESSAGE = 0 ; 0 = Don't print SAVING/LOADING Message
; 1 = print SAVING/LOADING Message like standard kernal routines
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." (Albert Einstein)