Been playing around with my new NTSC-VIC and noticed something strange. I always use VIC DOOM as a test if the system works, but using Final Expansion3 this would not work. I get to the title screen, choose the level. It goes to the level screen and loads the level, but then either the level screen stays blank or the computer goes to BASIC (like RUNSTOP/RESTORE).
I then tried the same computer with my Mega-Cart and it worked! So the NTSC VIC itself seems fine.
On my PAL-machine BOTH Mega-Cart and FE3 work with VIC DOOM. So it's only the NTSC-VIC and FE3-combo that won't run VIC-DOOM.
Did I find some obscure bug? Has anyone else gotten VIC DOOM to run with an FE3 on an NTSC-machine?
To Diddl and others: I have received my FE3 rev. 10, however all assembly sequences I have found refer to previous versions (rev. 9 in the best case). Although the place for the extra components looks quite obvious, has the assembly sequence for rev. 10 been published anywhere?
In first place, I have seen that the "jumpers" are no longer provided with the kit. Shall I desume that they are no longer necessary?
Also, there are four dip-switches in the lower-left corner. Which are their respective functions, and how should I set them for "normal" operation?
Has a user's manual for the FE (in english, of course) ever been written?
Okay, thanks, there goes some more recent assembly directions.
I have looked around for anything vaguely resembling to a user's manual. It seems that bits of stuff are spread everywhere, and this is so far the most cumbersome retro-computing accessory that I've had to deal with. In the end I came up with a site named "t-winkler.net", that I failed to understand wether it is "official" or kept by a group of users instead. However, it seems that the FE3 comes without firmware. At the end of the theory of links, this is where I have been led to:
Can please someone else inspect this page and see if there is a link to download the firmware that I may have missed? May I be damned if I could understand how to download anything from there!
FE3-20 erhältlich bei Retro Donald
Alte Homepage der Final Expansion
Downloads zur Final Expansion (Firmware, Pläne)
Final Expansion im Forum 64 - im Forum 64 wurde die FE3 in Teamarbeit entwickelt
Bericht **Final Expansion für VC20** in der CeVi-aktuell (Ausgabe 06/2009)
Die Final Expansion in der C64 WIKI
Vic20-Ian
The best things in life are Vic-20
Upgrade all new gadgets and mobiles to 3583 Bytes Free today! Ready