Back to the Vic After 29 Years - Hints and Advice
Moderator: Moderators
-
- Vic 20 Newbie
- Posts: 18
- Joined: Thu Dec 06, 2012 3:28 pm
- Location: Chatham Kent
Back to the Vic After 29 Years - Hints and Advice
Hello to Everyone!!!
I have recently purchased an old Vic (£10.00 on EBay I know I am Mad) and i was just looking for some advice on how to get the machine back into life if it does not work (Hopefully Picking it Up this weekend)
I am bracing myself that the Vic has some component Issues inside so I thought it was the best time to learn how to Solder.....
As I have already started a Breadbin 64 project where I have managed to make two bad motherboards in one nearly working one (Basic Rom needs to be changed but can not solder ) I wondered if any of you Guys and Gals can point me in the right direction on how to learn to Solder.
Would love to get this breadbin now fully working again and bring the VIC back to life if required.
Any Hints and Tips would be appricated
Thanks
I have recently purchased an old Vic (£10.00 on EBay I know I am Mad) and i was just looking for some advice on how to get the machine back into life if it does not work (Hopefully Picking it Up this weekend)
I am bracing myself that the Vic has some component Issues inside so I thought it was the best time to learn how to Solder.....
As I have already started a Breadbin 64 project where I have managed to make two bad motherboards in one nearly working one (Basic Rom needs to be changed but can not solder ) I wondered if any of you Guys and Gals can point me in the right direction on how to learn to Solder.
Would love to get this breadbin now fully working again and bring the VIC back to life if required.
Any Hints and Tips would be appricated
Thanks
3583 Basic Bytes Free
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
-
- Vic 20 Newbie
- Posts: 18
- Joined: Thu Dec 06, 2012 3:28 pm
- Location: Chatham Kent
Thanks for the Info Boray
Got the beast home now and it powers on but it does not have any image out not even blank screen.
Used a Blind Tape Command in the Tape Drive and it worked - Going to try and load a game or program (Vic did not have any when it was sold so will find a TAP some where) but reading Ray Carlsen's great site it sounds like its the VIC Chip???
Obviously you guys have more knowledge than me
Thanks
Got the beast home now and it powers on but it does not have any image out not even blank screen.
Used a Blind Tape Command in the Tape Drive and it worked - Going to try and load a game or program (Vic did not have any when it was sold so will find a TAP some where) but reading Ray Carlsen's great site it sounds like its the VIC Chip???
Obviously you guys have more knowledge than me
Thanks
3583 Basic Bytes Free
If you want to try the sound in blind, you could type:
POKE36878,15 (return)
POKE36875,200 (return)
POKE36878,15 (return)
POKE36875,200 (return)
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
-
- Vic 20 Newbie
- Posts: 18
- Joined: Thu Dec 06, 2012 3:28 pm
- Location: Chatham Kent
Hi Boray......Thanks for the Info.
Tried both of those Pokes with no luck
TV is coming back no signal found when VIC is switched on ......Tried re-seating the VIC chip and no joy either.
Vic is connect to video DIN to Scart lead i also use on my C64c
Thanks for your help so far
Tried both of those Pokes with no luck
TV is coming back no signal found when VIC is switched on ......Tried re-seating the VIC chip and no joy either.
Vic is connect to video DIN to Scart lead i also use on my C64c
Thanks for your help so far
3583 Basic Bytes Free
Sounds like a bad vic chip to me.
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
-
- Vic 20 Newbie
- Posts: 18
- Joined: Thu Dec 06, 2012 3:28 pm
- Location: Chatham Kent
I would just buy another vic-20. If you buy one cheap with some other problem then be aware that not all vic-20s have socketed vic chips. I guess it's the newest ones that have chips soldered on.
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
-
- Vic 20 Newbie
- Posts: 18
- Joined: Thu Dec 06, 2012 3:28 pm
- Location: Chatham Kent
-
- Vic 20 Newbie
- Posts: 18
- Joined: Thu Dec 06, 2012 3:28 pm
- Location: Chatham Kent
I am amazed at what some Vic 20's have sold for. Even with stuff wrong with them, they seem to be too much.
The best place I've dealt with is TPUG. I've bought some hardware from them with no regrets. $30 Canadian for a system with a tape drive and software, you can't go wrong. You might need to cut a deal with a member to arrange shipping. Heck, I might pick up an extra Vic 20 from them at the next meeting. Who knows when something else might go wrong? Personally, I'm now using an older model Vic with the 9V power supply and gold badge after the cost-reduced version I had had the same problem as yours. In fact, I recall my original Vic 20 having issues as well, and it was a cost reduced version as well...hmm...
http://www.tpug.ca/store/items-for-sale/
The best place I've dealt with is TPUG. I've bought some hardware from them with no regrets. $30 Canadian for a system with a tape drive and software, you can't go wrong. You might need to cut a deal with a member to arrange shipping. Heck, I might pick up an extra Vic 20 from them at the next meeting. Who knows when something else might go wrong? Personally, I'm now using an older model Vic with the 9V power supply and gold badge after the cost-reduced version I had had the same problem as yours. In fact, I recall my original Vic 20 having issues as well, and it was a cost reduced version as well...hmm...
http://www.tpug.ca/store/items-for-sale/
I don't think Vic-20 prices are too high. A vic-20 is not just a piece of electronic junk like a 10 year old laptop, it's a piece of computer history!
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
-
- Vic 20 Newbie
- Posts: 18
- Joined: Thu Dec 06, 2012 3:28 pm
- Location: Chatham Kent