Price list of what I make and sell

[eslapion]

Hello everyone,
Here's a complete price list of what I make and sell for various Commodore computers.

I can make (Maurice)DOS for the following computers and drives:
- standard C128 -> 20$ (2 chips with 1 switch)
- C128D -> 25$ (2 chips, one of which has a switch, includes ROM for 1571DCR)
- 1571, 1571DCR and 1581 -> 4$ (1 chip and no switch)
- Standard 1541 -> 10$ (1 chip on socket adapter and switch)
- Standard C64 -> 10$ (1 chip on socket adapter and switch)
- VIC-20 (NTSC only) -> 10$ (1 chip on socket adapter and switch)
- Commodore SX-64 (2 chips, each having their own adapter with a single switch for both) -> 25$
- Commodore 64c -> 7.50$ (one chip with a switch)
- Commodore 1541-II -> 7.50$ (one chip with a switch)

Upgrade ROMs:
- 318045-02 for 1581 -> 4$
- 310654-05 for 1571 -> 4$

- Upgrade for SuperSnapshot from V2 or V3 to V4 -> 4$

ROMs for Amiga Computers:
- Firmware V7.0 for A2091 SCSI controller (2 chips) -> 8$
- Firmware V3.4 for Fusion Forty accelerator (4 chips) -> 16$

- Triple kickstart chip with 3pos. switch for Amiga 2000 -> 30$

Logic chips for Amiga Computers:
- U202, U203, U701 or U714 for Amiga 3000 -> 8$ per chip

ROM recording service
- Burning YOUR DATA to a 27C256 OTP PROM (chip included)-> 4$
- Burning YOUR DATA to a 27C512 OTP PROM (chip included)-> 6$

Substitute PLA: (906114-01 for the 64 or 251641-02 for the Plus/4 or 251641-03 for the 1551 or 324745-01 or 324744-01 for the 8296)
- Normal -> 10$ each -> 10 or more: 8.50$ each
- Thick pins -> 12$ -> 10 or more: 10$ each

VIC-20 Ultimate Expander:
- Base with 32k RAM and read-only switch -> 30$
- 8k size ROM option -> 5$ extra
- 2 x 4k size ROM options(in the same 8k region) -> 7$ extra

Hardware components:
-Original rubber feet for VIC-20, C64, VIC-1541 and 1541 -> 0.50$ per feet (2$ for set of 4)
-Original C64 cartridge port connector -> 4$ each

And I also realign VIC-1540, VIC-1541 and C1541 drives using a professionnal digital oscilloscope for 10$ (requires you

to send only the mechanism)

ALL PRICES IN CANADIAN DOLLARS.

I accept paypal or money order.

[ral-clan]

Eslapion...

Just to be clear. You can indeed align 1540's? I seem to recall in a previous post that you were frustrated because the 1541 had an awkward adjustment screw (or something)?

[eslapion]

Eslapion...

Just to be clear. You can indeed align 1540's? I seem to recall in a previous post that you were frustrated because the 1541 had an awkward adjustment screw (or something)?

The last time I actually realigned a 1540, I had to hammer at the head stepper motor, very carefully and gently for nearly 4 hours.

Now, I don't do that anymore. I change the stepper motor altogether or I change the mechanism for one that comes from a 1541.

[terry]

Eslapion,

could you please give me your email address I might buy some of the Hardware you sell, and I have a few questions I want to ask you privately.

-terry