Does anyone either have a Cardco Cardboard/3S 3 slot cartridge sport expander manual they could scan and upload here, or better still know where I could find a scan of one? My googling skills have failed me.
I was able to find the dip switch settings, but not a copy of the manual
Dip 1: Slot 1, block 5
Dip 2: Slot 1, block 3
Dip 3: Slot 2, block 5
Dip 4: Slot 2, block 3
Dip 5: Slot 3, block 5
Dip 6: Slot 3, block 3
Dip 7: Blocks 1 & 2 for all 3 slots
Cardco Cardboard /3s
Moderator: Moderators
-
- Vic 20 Enthusiast
- Posts: 160
- Joined: Wed Feb 24, 2021 11:32 am
- Location: NC, USA
- Occupation: Engineer
Re: Cardco Cardboard /3s
My heart sank when I opened the box and manual wasn’t there. Fortunately I found it in my manual drawer. I will scan it in the next week and post it here if you are still looking for it. FYI the 6 manual is very similar and has most of the same material. https://commodore.bombjack.org/vic-20/h ... _6_VIC.pdf
-
- Vic 20 Enthusiast
- Posts: 160
- Joined: Wed Feb 24, 2021 11:32 am
- Location: NC, USA
- Occupation: Engineer
Re: Cardco Cardboard /3s
That would be great. I have the 6 manual, and it's available online, but I haven't been able to find the 3manual.
- orion70
- VICtalian
- Posts: 4341
- Joined: Thu Feb 02, 2006 4:45 am
- Location: Piacenza, Italy
- Occupation: Biologist
Re: Cardco Cardboard /3s
Same here ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Cardco Cardboard /3s
Could not post the pdf here, so it is available at https://www.mediafire.com/file/qoskqtn8 ... 3.pdf/file
Re: Cardco Cardboard /3s
You should send this to David so it is preserved on the Bombjack archive
https://commodore.bombjack.org/
https://commodore.bombjack.org/
Re: Cardco Cardboard /3s
If you have compared the two, they are mostly the same with the exception of the differences between the 6 and the 3 switches and it's cabling.
- mathom
- Vic 20 Dabbler
- Posts: 80
- Joined: Wed Aug 07, 2019 11:37 am
- Location: Centennial, Colorado
- Occupation: Software Engineer
Re: Cardco Cardboard /3s
And going on a year later, I have to thank @Snogpitch for the scan. I just got my hands on one of these.
...mathom...